Skip Navigation
Send E-MailCompany Information tribotix.com | Newcastle, Australia | +61 2 49578255

MCU Boards

Before you purchase anything please read our Purchasing & Return Policy
Delivery will be charged upon Checkout - min charge is $AUD 15.
Notes for Australian Customers:
(i)
10% GST will be added upon checkout., and
Notes for International Customers:
(ii)
delivery charges from PayPal are for customers within Australia & New Zealand, please contact us for freight charges outside Australia.
MCU Boards

NB. Header strips are included.

OpenCM9.04A plus Accessory Set
The OpenCM9.04 is an open source ARM Cortex M3 board with CM-9 IDE inspired by Arduino. The OpenCM9.04 uses a STM32F103C8 (ARM Cortex-M3) as the processing system and allows 4 TTL Dynamixels (XL, AX, etc.) and comms devices (ZigBee & Bluetooth) to be connected easily. 16 GPIO are also available via a header strip.

NB. Soldering of connectors is required - more info here ....

User Manual >>

Qty
 
$AUD
 
1
 
27.70
1+
 

NB. Header strips are included.

OpenCM9.04C
The OpenCM9.04 is an open source ARM Cortex M3 board with CM-9 IDE inspired by Arduino. The OpenCM9.04 uses a STM32F103C8 (ARM Cortex-M3) as the processing system and allows TTL Dynamixels (4 x XL, NO AX, etc.) and comms devices (ZigBee & Bluetooth) to be connected easily. 16 GPIO are also available via a header strip.

User Manual >>

Qty
 
$AUD
 
1
 
27.70
1+
 

OpenCM RS485 EXP
The OpenCM RS485 Expansion board can be used with any of the OpenCM modules. It has circuitry to allow RS485 Dynamixels to be connected as well as voltage conditioning circuitry to take an input from a SMPS. A great addition to the OpenCM9.04 control modules.

User Manual >>

Qty
 
$AUD
 
1
 
41.60
1+
 

 

MCU Boards

CM-2+
ATmega128 MCU board
CM-2+ has an RS485 I/F's for DX, RX & EX modules and a TTL I/F for AX modules. ZigBee Comms is available by adding the ZIG-100 module.

NB.
serial cable is supplied.
could need a USB2Dynamixel converter if you need to Download software via a USB port.

CM-2+ User Manual >>
CM-2+ C Sample Code >>
CM2+ firmware >>

Qty
 
$AUD
 
1
 
147.00
1+
 

CM-530
Premium Bioloid Kit MCU
ARM Cortex STM32F103RE MCU
CM-530 has TTL I/F's for AX & MXT modules ONLY. Can be connected to IR Sensor, Distance Measurement Sensor, Gyro Sensor and IR R/C Receiver module. ZigBee Comms is available by adding the ZIG-110 module.

NB.
This is the revised version of the CM-510 and uses a direct USB cable (no need for USB2Dynamixel and serial cable).

User Manual >>

Qty
 
$AUD
 
1
 
138.80
1+
 



CM-700
ATmega2561 MCU board
CM-700 has RS485 I/F for DX, RX & EX modules and a TTL I/F for AX modules. Can be connected to IR Sensor, Distance Measurement Sensor and Gyro Sensor. ZigBee Comms is available by adding the ZIG-110 module.

NB.
needs an LN-101 to Download software via a USB port.

User Manual >>

Qty
 
$AUD
 
1
 
166.60
1+
 


Join us at: